1. For those plastic parts and glass fibers, we can dilute and soak them with soapy water, disinfecting washing powder, bleaching powder, etc., then gently scrub with a soft cloth or soft brush, then rinse them with water, wipe them with a cleaning cloth or dry . Finally spray some 84 disinfectant.
2. If it is an indoor activity room, floor, wall, etc., daily ultraviolet radiation disinfection, and the room should be ventilated often. Disinfect with hydrogen peroxide spray once a week.
3. For the soft sponge part of large children's play equipment, we can wash it with a soft cloth moistened with soapy water.
4. For the metal parts of large children's amusement equipment, if rust removal is required, the rust can be removed with a brush and wiped with a dry cloth.
5. Moisture-resistant, heat-resistant, non-fading wooden parts can be washed with soap and water, dried, and sprayed with 84 disinfectant.
6. When cleaning the electrical parts of the circuit, you must first ensure that the power is turned off and watering is prohibited. Generally, use a wet cloth to scrub it, and then connect it to the power supply after it is completely dry.
7. All large-scale children's amusement equipment, outdoor slides and drill pipes should not have accumulated water after rainy days. If there is, a hole with a diameter of 4 mm should be punched at the lowest point to drain water.
8. While disinfecting large-scale children's amusement equipment, be sure to check whether the connection part is solid, refueling the metal frequently connected part, whether the circuit appliances and ordinary parts are damaged, and all parts cannot leave spikes and other safety hazards.
